Autodesk Inventor Users

This has nothing to do with Inventor.

Just a lousy spam misplaced in a series of groups and his so called "model" is against the Grabcad rules, as there is just an alibi part

but i made a lot of parts in inventor. Thank you my friend

Thank you my friend,

thank you for your help. I was not aware. I would like to state that I will start working on it as soon as possible. thank you so much again

Dear anmay

It says my messages are spam. humiliates me and my question

ALL your vehicle models have only one dummy placeholder part. You were fully aware that no CAD files were included. Nobody would have noticed or cared had you not bombed so many groups with your spam.

Dear bob hi,

now you are harassing and insulting me. You can point out my shortcomings, but you have no right to judge me with accusation and immorality. this is very bad behavior. Maybe I don't know some rules, but that doesn't explain that you have to insult. I don't need to tell you that you are a very rude and very bad person. because I'm ashamed to say it. That's why I'm not saying. please be respectful

SPAMMER GOAWAY!

Clearly you wont accept the majority of opinions in the INVENTOR group people aren't accusing you of anything An accusation is yet unproven whereas it's plain to see what you are trying here.

Not knowing the rules is no excuse ....

There are plenty of places where you can share your models and ask for opinions ( Discord Reddit etc)

If you had included the Inventor files or a packngo folder you may have found more support

Just have a look, how many groups yoou spammed with this so called "question"

Whats the crrelation to e.g. Combat robots, Impact engineering, Manufacturing drawings exchange, ...

Community Guidelines:

Do not post any contact information (yours or anyone else's) in public spaces

Do not use GrabCAD to ask for, or offer, paid work anywhere outside of the Jobs & Career Opportunities Group

Do not upload deceptive or incomplete work

Do not use a place-holder file to make render-only pages go public

After more then 6 years telling not to know the rules is a very poor excuse

=> you are not a victim

This is not the first time you have been made aware that only having a placeholder file is against GrabCAD rules. I carefully responded to you once before when you asked for help regarding a stolen design:

"...They have provided a complete CAD file for the mold. You haven't. At the very least you are breaking GC rules by only providing a placeholder model. You haven't provided anything except renderings and a very short video..."

Grabcad question

The stolen model

Hello friends, My model on my page was stolen and the person who stole it published it as if it was their own model. I started to share some of my models from all my posts. I no longer publish all my models in Grabcad. I have written to Grabcad many times and complained about this theft, but I st...

In spite of my attempt to help you, you still continue to include only a placeholder file. I believe you would not even do this except GrabCAD will not let you post unless some CAD file is included. The single CAD file you include is nothing but a truck logo. The model in the video and renderings is obviously quite complicated yet you have included no CAD files for it. Not even a sample such that others could see the quality of your work and then request the remainder. Nothing!

The point of GrabCAD is to share designs and models that include all the associated CAD content in a form that others may use. If you are worried about someone stealing your designs then I suggest you are sharing things that you shouldn't, and this is not the place for you.

This is a question and open to discussion. you may like or dislike. You don't have to answer either. also thousands of spam from other groups. I'm not doing this. I consulted you about a subject. I don't think you need to give such bad answers.

This is a question and open to discussion. you may like or dislike. You don't have to answer either. also thousands of spam from other groups. I'm not doing this. I consulted you about a subject. I don't think you need to give such bad answers.

This is a question and open to discussion. you may like or dislike. You don't have to answer either. also thousands of spam from other groups. I'm not doing this. I consulted you about a subject. I don't think you need to give such bad answers.

Thank you Bob ,

You are very helpful in everything. I will take your words into consideration.

If you don't like this model and video, I would like you to review my product with the model and video in the link below, which is my other mastery model :D

I would like to remind you that this model has received thousands of views :D

Model link: https://grabcad.com/library/hidromek-640-design-hmk-640-wheel-loader-resine-printed-rc-control-3d-printed-solidworks-bulldozer-1

Video link: https://youtu.be/48z46pqgyBA

If you don't like this model and video, I would like you to review my product with the model and video in the link below, which is my other mastery model :D

I would like to remind you that this model has received thousands of views :D

Model link: https://grabcad.com/library/hidromek-640-design-hmk-640-wheel-loader-resine-printed-rc-control-3d-printed-solidworks-bulldozer-1

Video link: https://youtu.be/48z46pqgyBA

If you don't like this model and video, I would like you to review my product with the model and video in the link below, which is my other mastery model :D

I would like to remind you that this model has received thousands of views :D

Model link: https://grabcad.com/library/hidromek-640-design-hmk-640-wheel-loader-resine-printed-rc-control-3d-printed-solidworks-bulldozer-1

Video link: https://youtu.be/48z46pqgyBA

If you don't like this model and video, I would like you to review my product with the model and video in the link below, which is my other mastery model :D

I would like to remind you that this model has received thousands of views :D

Model link: https://grabcad.com/library/hidromek-640-design-hmk-640-wheel-loader-resine-printed-rc-control-3d-printed-solidworks-bulldozer-1

Video link: https://youtu.be/48z46pqgyBA

where is the full model?

Again just a lot of pictures and one alibi part, begging for likes, advertizing youtube videos, posting contact informations, .......

The OP has nothing worthwhile to contribute to GrabCAD. He is just a troll.

For those that don’t understand, look up “internet troll”.

Since we lack moderation and the willingness to kick people off GrabCAD for violating the rules: Sometimes it’s best not to feed the trolls.

SPAMMER !SPAMMER !SPAMMER !SPAMMER !

You are acting insultingly towards me. If you are aware, I don't take you into consideration bro. You're just busy consuming yourself right now. Who knows how it melts with envy. You're great, please keep being like this.  :D :D :D :D :D

1. Do not solicit GrabCAD members for "likes" or contact information. Some do this through spam-messaging random members. Others do it by uploading incomplete models or hiding their work behind a password in a compressed file. This sort of content will be immediately removed if spotted by GrabCAD Support.

I'm so sorry I don't understand. my friend

I'm so sorry I don't understand. my friend

Simple. It means Don’t “upload incomplete models”.

A single part file uploaded like you have done is against the guidelines. If you can’t upload the entire model in a form that others can use then you have broken the rule.

All the renderings, animations, and links to videos make the problem worse. You MUST upload the complete 3D model.

Every part. Every assembly. No exceptions.

I am trying to help you understand. Do you understand?

Thank you very much for your help.

You're right when you say that to me. I ask you to tell thousands of people who have not uploaded other models.

Thank you very much for your help.

You're right when you say that to me. I ask you to tell thousands of people who have not uploaded other models.

Nobody notices the other incomplete models because they are not excessively promoting themselves. And just because others do it doesn’t make it okay.

While posting in so many groups is considered rude to begin with, that is the reason everybody noticed you are breaking the guidelines. Yes, cross-posting in multiple groups is considered rude.

1. You should only post in one group.
2. You should not make any post just for the purpose of promoting your model.
3. Your models need to be complete.